Silvia: Design Options

Conditional Options

Biceps ease

The amount of ease at your upper arm. Note that while we try to respect this, fitting the sleeve to the armhole takes precedence over respecting the exact amount of ease.

• Type: Percentage
• Default: 15%
• Minimum: -10%
• Maximum: 30%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleeve length (Dolman)

The length of the sleeve as a percentage of the distance from the shoulder to the wrist

• Type: Percentage
• Default: 30%
• Minimum: 1%
• Maximum: 120%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleeve length

The length of the sleeve as a percentage of the distance from the shoulder to the wrist

• Type: Percentage
• Default: 30%
• Minimum: 10%
• Maximum: 120%

The documentation for this option has not been created by the creator (yet). Such is preview…

Wrist ease

The amount of ease at your wrist

• Type: Percentage
• Default: 20%
• Minimum: -15%
• Maximum: 200%

The documentation for this option has not been created by the creator (yet). Such is preview…

Opening seam allowance

The size of the seam allowance for neck, arm openings as a percentage of the seam allowance

• Type: Percentage
• Default: 0%
• Minimum: 0%
• Maximum: 100%

The documentation for this option has not been created by the creator (yet). Such is preview…

Raglan angle (back)

The angle of the raglan back seam

• Type: Degrees
• Default: 15°
• Minimum: 0°
• Maximum: 25°

The documentation for this option has not been created by the creator (yet). Such is preview…

Raglan angle (front)

The angle of the raglan front seam

• Type: Degrees
• Default: 20°
• Minimum: 0°
• Maximum: 30°

The documentation for this option has not been created by the creator (yet). Such is preview…

Raglan offset (back)

The offset of the raglan back seam

• Type: Percentage
• Default: 24%
• Minimum: 1%
• Maximum: 99%

The documentation for this option has not been created by the creator (yet). Such is preview…

Raglan offset (front)

The offset of the raglan front seam

• Type: Percentage
• Default: 33%
• Minimum: 1%
• Maximum: 99%

The documentation for this option has not been created by the creator (yet). Such is preview…

Arm opening pitch (back)

The curve on the back of the arm opening for sleeveless designs

• Type: Percentage
• Default: 80%
• Minimum: 60%
• Maximum: 90%

The documentation for this option has not been created by the creator (yet). Such is preview…

Arm opening pitch (front)

The curve on the front of the arm opening for sleeveless designs

• Type: Percentage
• Default: 100%
• Minimum: 70%
• Maximum: 120%

The documentation for this option has not been created by the creator (yet). Such is preview…

Arm opening size

The size of the arm opening for sleeveless designs

• Type: Percentage
• Default: 60%
• Minimum: 20%
• Maximum: 80%

The documentation for this option has not been created by the creator (yet). Such is preview…

Waist fitting dart percentage

How much of the waist should be fitted using the dart

• Type: Percentage
• Default: 50%
• Minimum: 0%
• Maximum: 100%

The documentation for this option has not been created by the creator (yet). Such is preview…

Hem allowance

The size of the hem allowance as a percentage of the seam allowance

• Type: Percentage
• Default: 300%
• Minimum: 0%
• Maximum: 600%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleeve width

The width of the sleeve opening

• Type: Percentage
• Default: 75%
• Minimum: -10%
• Maximum: 200%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleeve width guarantee

Controls how much of the sleeve width will be guaranteed. This determines how much we can alter the sleeve width to fit the sleeve in the armhole.

• Type: Percentage
• Default: 85%
• Minimum: 25%
• Maximum: 100%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap back X

Controls the placement of the sleevecap back pitchpoint on the X-axis (horizontal)

• Type: Percentage
• Default: 60%
• Minimum: 35%
• Maximum: 65%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap back Y

Controls the placement of the sleevecap back pitchpoint on the Y-axis (vertical)

• Type: Percentage
• Default: 33%
• Minimum: 30%
• Maximum: 65%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap ease

The amount by which the sleevecap seam is longer than the armhole seam.

• Type: Percentage
• Default: 0%
• Minimum: 0%
• Maximum: 10%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap front X

Controls the placement of the sleevecap front pitchpoint on the X-axis (horizontal)

• Type: Percentage
• Default: 55%
• Minimum: 35%
• Maximum: 65%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap front Y

Controls the placement of the sleevecap front pitchpoint on the Y-axis (vertical)

• Type: Percentage
• Default: 33%
• Minimum: 30%
• Maximum: 65%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q1 offset

Controls the curvature of the sleevecap in the first quadrant (front armhole)

• Type: Percentage
• Default: 1%
• Minimum: 0%
• Maximum: 7%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q1 downward spread

Controls the spread of the sleevecap first quadrant curvature towards the armhole

• Type: Percentage
• Default: 6%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q1 upward spread

Controls the spread of the sleevecap first quadrant curvature towards the shoulder

• Type: Percentage
• Default: 15%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q2 offset

Controls the curvature of the sleevecap in the second quadrant (front shoulder)

• Type: Percentage
• Default: 4%
• Minimum: 0%
• Maximum: 7%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q2 downward spread

Controls the spread of the sleevecap second quadrant curvature towards the armhole

• Type: Percentage
• Default: 15%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q2 upward spread

Controls the spread of the sleevecap second quadrant curvature towards the shoulder

• Type: Percentage
• Default: 10%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q3 offset

Controls the curvature of the sleevecap in the third quadrant (back shoulder)

• Type: Percentage
• Default: 2.5%
• Minimum: 0%
• Maximum: 7%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q3 upward spread

Controls the spread of the sleevecap third quadrant curvature towards the shoulder

• Type: Percentage
• Default: 10%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q3 downward spread

Controls the spread of the sleevecap third quadrant curvature towards the armhole

• Type: Percentage
• Default: 8%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q4 offset

Controls the curvature of the sleevecap in the fourth quadrant (back armhole)

• Type: Percentage
• Default: 1%
• Minimum: 0%
• Maximum: 7%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q4 upward spread

Controls the spread of the sleevecap fourth quadrant curvature towards the shoulder

• Type: Percentage
• Default: 7%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap Q4 downward spread

Controls the spread of the sleevecap fourth quadrant curvature towards the armhole

• Type: Percentage
• Default: 6.3%
• Minimum: 4%
• Maximum: 20%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap top X

Controls the horizontal location of the sleevecap top.

• Type: Percentage
• Default: 50%
• Minimum: 25%
• Maximum: 75%

The documentation for this option has not been created by the creator (yet). Such is preview…

Sleevecap top Y

Controls the height of the sleevecap. A higher value results in a higher and more narrow sleevecap.

• Type: Percentage
• Default: 45%
• Minimum: 35%
• Maximum: 125%

The documentation for this option has not been created by the creator (yet). Such is preview…

Extra bust ease

Extra amount of ease to consider when drafting the full bust adjustment. This is added on top of the chest ease and will add extra compression to the bust when negative.

• Type: Percentage
• Default: -5%
• Minimum: -15%
• Maximum: 15%

The documentation for this option has not been created by the creator (yet). Such is preview…

Ribbing stretch

How much the ribbing is stretched relative to the main fabric

• Type: Percentage
• Default: 5%
• Minimum: 0%
• Maximum: 30%

The documentation for this option has not been created by the creator (yet). Such is preview…

Style

Construction

Sets the type of the top (t-shirt, raglan, sleeveless, etc.)

• Type: List
• Default: set-in
• options:
  • set-in
  • sleeveless
  • racerback

The documentation for this option has not been created by the creator (yet). Such is preview…

Armhole depth

Controls the depth of the armhole. Higher values make a deeper armhole.

• Type: Percentage
• Default: 15%
• Minimum: 0%
• Maximum: 40%

The documentation for this option has not been created by the creator (yet). Such is preview…

Neck opening based on

Which measurement to use for the neck opening

• Type: List
• Default: head
• options:
  • neck
  • head
  • waist
  • seat

The documentation for this option has not been created by the creator (yet). Such is preview…

Neck opening size

Determines the circumference of the neck opening

• Type: Percentage
• Default: 80%
• Minimum: 65%
• Maximum: 150%

The documentation for this option has not been created by the creator (yet). Such is preview…

Neck width

Make the neck opening deep and narrow, or wide and shallow.

• Type: Percentage
• Default: 60%
• Minimum: 0%
• Maximum: 130%

The documentation for this option has not been created by the creator (yet). Such is preview…

Back neck depth

The depth of the back neck relative to the front

• Type: Percentage
• Default: 30%
• Minimum: 5%
• Maximum: 200%

The documentation for this option has not been created by the creator (yet). Such is preview…

Neck opening shoulder angle

At which angle the neck opening goes over your shoulder

• Type: Degrees
• Default: 25°
• Minimum: 0°
• Maximum: 35°

The documentation for this option has not been created by the creator (yet). Such is preview…

Front neck opening shape

Change the shape of the front neck opening

• Type: Percentage
• Default: 100%
• Minimum: 0%
• Maximum: 200%

The documentation for this option has not been created by the creator (yet). Such is preview…

Length

The length of the top, measured from the waist down

• Type: Percentage
• Default: 75%
• Minimum: -15%
• Maximum: 100%

The documentation for this option has not been created by the creator (yet). Such is preview…

Straight hem

If the bottom hem should be kept straight or in an A-line shape

• Type: Boolean
• Default: false

The documentation for this option has not been created by the creator (yet). Such is preview…

Ribbing height

Width of the ribbing, set to 0 to disable

• Type: Percentage
• Default: 0%
• Minimum: 0%
• Maximum: 1000%

The documentation for this option has not been created by the creator (yet). Such is preview…

Side panel width (back)

Width of the side panel towards the back

• Type: Percentage
• Default: 18%
• Minimum: 2%
• Maximum: 25%

The documentation for this option has not been created by the creator (yet). Such is preview…

Side panel width (front)

Width of the side panel towards the front

• Type: Percentage
• Default: 15%
• Minimum: 2%
• Maximum: 25%

The documentation for this option has not been created by the creator (yet). Such is preview…

Fit

Chest ease

The amount of ease at your upper body

• Type: Percentage
• Default: 8%
• Minimum: -10%
• Maximum: 25%

The documentation for this option has not been created by the creator (yet). Such is preview…

Waist ease

The amount of ease at your waist

• Type: Percentage
• Default: 12%
• Minimum: -20%
• Maximum: 40%

The documentation for this option has not been created by the creator (yet). Such is preview…

Seat ease

The amount of ease at your seat

• Type: Percentage
• Default: 8%
• Minimum: -20%
• Maximum: 40%

The documentation for this option has not been created by the creator (yet). Such is preview…

Advanced

Across back factor

Controls your across back width as a factor of your shoulder to shoulder measurement.

• Type: Percentage
• Default: 88%
• Minimum: 88%
• Maximum: 100%

The documentation for this option has not been created by the creator (yet). Such is preview…

Shoulder slope reduction

The amount by which the shoulder slope is reduced to allow for shoulder padding.

• Type: Percentage
• Default: 0%
• Minimum: 0%
• Maximum: 80%

The documentation for this option has not been created by the creator (yet). Such is preview…

Fit

Bust adjustment

If the pattern should be drafted with a full bust adjustment (FBA). This will result in a more fitted garment for people with breasts.

• Type: Boolean
• Default: true

The documentation for this option has not been created by the creator (yet). Such is preview…

Style

Shoulder seam shift: armhole side

Increase this option to shift the shoulder seam forward on the armhole side. Decreasing it shifts it backwards.

• Type: Percentage
• Default: 0%
• Minimum: -100%
• Maximum: 100%

The documentation for this option has not been created by the creator (yet). Such is preview…

Shoulder seam shift: neck side

Increase this option to shift the shoulder seam forward on the neck side. Decreasing it shifts it backwards.

• Type: Percentage
• Default: 0%
• Minimum: -100%
• Maximum: 100%

The documentation for this option has not been created by the creator (yet). Such is preview…